Cemtrex MIP Ducon mercury monitors and carbon credits

Home

Products

Service

News

The EPA Clean Air Mercury rule requires that all coal fired power plants must provide continuous mercury monitoring by 2009. Cemtrex's SM4 mercury monitor, a result of 10 years experience in mercury monitoring business, provides reliable online measurements at a much lower cost than any other competing model in the market. Cemtrex SM4 is the first instrument working on a thermo catalytic principle avoiding wet chemical sample treatment. As a consequence, maintenance demand has been drastically minimized. It is the only monitor that required no maintenance at a coal fired utility wet stack, no carrier gases, no water and 95% data availability.IT COSTS 40% LESS THAN CLOSEST COMPETITION. SM4 uses straight extractive Teflon sheathed Hastelloy probe with no plugging or corrosion.

Technical Specifications of SM-4
Principle of measurement	Thermo Catalytic converter followed by atomic absorption detector (@ 253.7 nm)
Measuring range	0-0.1 ug/m3; 0-10 ug/m3; 0-50 ug/m3
Detection Limit	0.1 ng/m3
Response Time	10 sec � 90 sec
Max.Sample gas temperature	(600 ^o F)
Ambient temperature range allowed	1^o F to 120 ^o F
Sample gas flow	40 �60 l/h
Sample line length	1000 Feet typical
Electrical Power consumption	110 V AC/50-60 Hz; ca.750 VA plus sample line ca. 130 VA per meter length
Air consumption	2 bar (29 PSI); ca. 10 l/hour typical
Dimensions for installation	Ca.55 x 165 x 80 cm (w x h x d)
Weight	Ca. 50 kg (including mounting frame)
Service interval	6 months