| Contact
Details: |
| |
|
| Company |
|
| Address: |
|
| Telephone: |
|
| Fax: |
|
| Email |
|
| Web: |
|
| Contact
Person: |
|
| Title: |
|
| Site
Address: |
|
| Nearest
Airport: |
|
| |
|
| Existing
CEMS Details: |
| |
| Is
this a new installation? |
|
| If
already have CEMS (to be replaced): |
|
What
are the types of gases measured and analyzers available at
site? |
Make: |
|
Model: |
|
| Year
of Installation: |
|
| |
|
| Process
Details: |
| |
|
| Is
it process application or Compliance emissions application? |
|
| Compliance
Norms required? |
|
| 40CFR60,
75, Nox Budget or other? |
|
| Other: |
|
| Process
description (boiler/incinerator...): |
|
| Fuel
Type (gas/oil/coal/pulverized coal...): |
|
Pollution
control technique used at present:
(ESP/bag filter/cyclone/wet scrubber..) |
|
Location
of sample probe:
(horizontal duct/vertical duct) |
|
| Insertion
length of the probe required? |
|
| Threaded
2-inch stack/duct flange for 3/4 inch #150 sample tube and heated
filter available? |
|
| Duct
dimensions at measuring point: |
|
| Duct
material of construction: |
|
| Duct
insulation details: |
|
| |
| Process
Gas Details: |
| |
|
Type
of gas to be measured:
(Co/Co2/So2/Nox/THC...) |
|
| Range
of gases to be measured: |
|
| Preferred
Technology used for analyzers
(specify if different): |
Co, Co2, and So2: NDIR
O2: Paramagnetic |
NOx: Chemiluminescence's
THC: FID |
| Other: |
|
| Process
gas temperature: |
MIN |
|
| TYP |
|
| MAX |
|
Process
gas moisture content:
|
MIN |
|
| TYP |
|
| MAX |
|
Process
gas pressure: |
MIN |
|
| TYP |
|
| MAX |
|
| Is this
process continuous? |
|
| What
is the batch cycle time of the process if not continuous? |
|
| |
|
| Analyzer
Details: |
| |
|
| CEMS
rack to be installed indoors or outdoors? |
|
| MIN,
TYP and MAX Ambient temperature in the vicinity of the CEMS?
|
|
| AC
Power availability at CEMS? |
|
| AC
Power availability for Heated line? |
|
| Distance
(heated line laid) between the CEMS and the Sample Probe |
|
| Availability
of clean, dry instruments air at (@-20 F Dew Point, 25 CFM at
20 PSIG continuous) for back purge? |
|
| Distance
between air header and CEMS Rack? |
|
| Calibration
gases required (for daily and linearity/RATA)? |
|
| |
|
| |
|
